Station Radios
K4SLB/R 444.450+ 103.5 CTCSS
The
computer
interface is a homebrew connected to Homebrew PIII 800MHZ
computer with 512 MB RAM
B&D
Controller.
The Receiver is a Motorola
D34MJA77A3CK
The Transmitter is a Motorola D44MJA7DA5CK
Announcements by
Echo Time TTS Plus by KH2D,
Voice provided by
Neo Speech Paul
and yours truly
Antenna is a Comet GP9
Duplexer is a DB Products
With the addition of a set of Motorola Pass filters
connected to a ARR GaaSFet Preamp
N4GUS/R
927.7000- 411DPL
(AKA K4EIO/R)
The
computer
interface is a homebrew connected to Resurrected Dell P4 2.4Hhz
computer with 512 MB RAM.
The receiver is a Motorola Maxtrac
D35XXXXX 800Mhz conversion
The Transmitter is a Motorola Maxtrac D37XXXXX
it is controlled by the same computer using
EchoStation
Software
The second sound card is connected to the K4SLB/R for streaming
audio
connected to a spare Motorola D44MJA7DA5CK
Announcements by
Echo Time TTS Plus by KH2D,
Voice provided by
Neo Speech Kate,
EchoStation and yours truly
Antenna is a
Station Master folded Dipole (11dbi)
Duplexer is a unmarked and an ebay special
N4ARG 147.210+ 103.5 CTCSS / 703DPL
The
computer
interface is a homebrew connected to Resurrected Compaq 2.4Hhz
computer with 512 MB RAM.
Announcements by
Echo Time TTS Plus by KH2D,
Voice provided by
Neo Speech Kate,
EchoStation and yours truly
The Receiver is a Motorola
D43XXXXX
The Transmitter is a Motorola D43XXXXX
Dual Band Antenna for the 70cm and 2M
GP-6
146MHz 6.5dBi 5⁄8 wave x 2
446MHz 9.0dBi 5⁄8 wave x 5
GP-9
146MHz 8.5dBi
5⁄8 wave x 3
446MHz 11.9dBi
5⁄8 wave x 8
The tower is a Dual guyed 97' Rohn
25G
The tower reached it's projected height on October 29th, 2006
New, August 2007. The new WA3PGL Super
Controller / Mixer has been added to all 3 repeaters. This is
a design conceived by K4SLB - WA3PGL - N4HHA constructed by WA3PGL.
It utilizes many of the previous homebrew components and 3
ID-O-Matic's by
N0XAS.
The 3 computers remain for the
individual EchoLink connections. The system now has the capability
of linking any choice of the three repeaters to one an other or all
three together, using the new hardware controller.
|